Items where Department / MOR is "Civil" and Year is 2020

Thesis

A.MOHAMAD BEDDELEE, AIZAT AKMAL (2020) LABORATORY AND NUMERICAL SIMULATION OF BORED PILES IMPERFECTIONS USING OPTICAL FIBRE SENSOR. Masters thesis, Universiti Teknologi PETRONAS.

RAMLI@YUSOF, NOOR HAFIZAH (2020) SUPERCRITICAL-CO2 EXTRACTION OF SAPONINS FROM FURCRAEA SELLOA VAR. MARGINATA AND SPENT CAMELLIA SINENSIS OF GOLDEN APPLE SNAIL MITIGATION. Masters thesis, Universiti Teknologi PETRONAS.

AHMRAN, MUHAMMAD SHAFIQ AIMAN (2020) THE EFFECT OF SUBSURFACE GROUND CONDITION ON THE PERFORMANCES OF MICROTUNNELLING BORING MACHINE (MTBM). Masters thesis, Universiti Teknologi PETRONAS.

AL-BARED, MOHAMMED ALI MOHAMMED (2020) THE MECHANICAL BEHAVIOR OF SOFT MARINE CLAY STABILIZED WITH RECYCLED TILE MATERIAL. PhD. thesis, Universiti Teknologi PETRONAS.

AL-FAKIH, AMIN ALI ALI (2020) STRUCTURAL BEHAVIOR OF MASONRY SYSTEM MADE OF RUBBERIZED INTERLOCKING BRICKS. Doctoral thesis, Universiti Teknologi PETRONAS.

ASHRAF, MUHAMMAD SOHAIL (2020) STRENGTHENING OF COASTAL SANDS BY USING GELLAN GUM AND OPTIMIZED MICROBIALLY INDUCED CALCITE PRECIPITATION. Masters thesis, Universiti Teknologi PETRONAS.

Al-Mahbashi, Najib Mohammed Yahya Al-Mahbashi (2020) Adsorption of Cooper and Cadmium From Aqueous Solutions Using Sulfurized Activated Carbon Derived From Sewage Sludge. Masters thesis, Universiti Teknologi PETRONAS.

CHEE, KHOO MIN (2020) EFFECTS OF EARTH PRESSURE BALANCE SHIELD TUNNELLING ON GROUND SETTLEMENT. Masters thesis, Universiti Teknologi PETRONAS.

GHAZALI, MUHAMMAD FARID (2020) DEVELOPMENT OF DISTRIBUTED FIBRE OPTIC INCLINOMETER FOR GROUND MOVEMENT DETECTION. Masters thesis, Universiti Teknologi PETRONAS.

HARUNA, SANI (2020) DEVELOPMENT AND MIX OPTIMIZATION OF ONE-PART BLENDED HIGH CALCIUM FLY ASH – SLAG GEOPOLYMER PASTE AND CONCRETE. PhD. thesis, Universiti Teknologi PETRONAS.

IDRIS, NURUL NEESA (2020) DEVELOPMENT OF RADIAL INTERACTION RULES FOR CORROSION IN X42 API 5L PIPELINES. Masters thesis, Universiti Teknologi PETRONAS.

JEREMIAH, SEAN SURAJ (2020) GENERIC FRAMEWORK FOR VALVE STICTION DETECTION AND COMPENSATION WITH ANFIS-ACTIVATED DUAL-MODE MPC. Masters thesis, Universiti Teknologi PETRONAS.

JONATHAN, EMMANUEL EDMUND (2020) ASSESSMENT OF REINFORCED THERMOPLASTIC PIPE (RTP) UNDER LONGITUDINAL AND CIRCUMFERENTIAL CRACK ORIENTATIONS. Masters thesis, Universiti Teknologi PETRONAS.

JUSOH, MUHAMMAD NOOR HISYAM (2020) CORRELATIONS OF GEO-ELECTRICAL RESISTIVITY WITH GEOTECHNICAL SOIL PARAMETERS. Doctoral thesis, Universiti Teknologi PETRONAS.

LIM ABDULLAH , MUHAMMAD SANI (2020) DEVELOPMENT OF ARTIFICIAL INTELLIGENT PREDICTION MODEL FOR DELAYS AND COST OVERRUNS DURING THE CONSTRUCTION OF PALM OIL REFINERY PROJECTS IN MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

MOAYEDI, FARZANEH (2020) DEVELOPMENT OF OPTIMIZED COMPUTATIONAL MODEL FOR NON-STRUCTURAL MATERIAL BASED ON ENVIRONMENTAL MANAGEMENT SYSTEM. Doctoral thesis, Universiti Teknologi PETRONAS.

MOHAMMED, MUBEEN ISAM (2020) REMOVAL OF LEAD AND COPPER USING RED ALGAE GRACILARIA CHANGII AND ITS ACTIVATED CARBON. Masters thesis, Universiti Teknologi PETRONAS.

MOHD AZMEE, NORZAIREEN (2020) DEVELOPMENT OF SUSTAINABLE ULTRA-HIGH PERFORMANCE CONCRETE USING HIGH VOLUME FLY ASH AND ULTRAFINE CALCIUM CARBONATE. Doctoral thesis, Universiti Teknologi PETRONAS.

Moayedi, Farzaneh (2020) Development of Optimized Computational Model for Non-Structural Material Based on Environmetal Management System. Doctoral thesis, Universiti Teknologi PETRONAS.

NIK AB RAZAK , NIK NURUL AIN NABILAH (2020) FINNED SPACER FOR ENHANCED MEMBRANE FOULING CONTROL IN CHLORELLA VULGARIS FILTRATION. Masters thesis, Universiti Teknologi PETRONAS.

PANGESTU, LIGAR ANGGARA (2020) THE EFFECTS OF WAVE-IN-DECK TO RESERVE STRENGTH RATIO OF JACKET PLATFORMS USING SILHOUETTE METHOD AND DETAILED COMPONENT METHOD. Masters thesis, Universiti Teknologi PETRONAS.

SABRI, FATIN NABILAH (2020) Numerical Modelling of Bacteria and Spilled Oil in Sea Water of Lumut, Perak by Using Lattice Boltzmann Method. Masters thesis, Universiti Teknologi PETRONAS.

SAMBAS, NURUL FARADILA (2020) ASSESSMENT OF RAINWATER TREATMENT PERFORMANCE BY AN INTEGRATED RAINWATER HARVESTING SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

SINGA, PRADEEP KUMAR (2020) DEGRADATION OF COD AND PAHs FROM HAZARDOUS WASTE LANDFILL LEACHATE USING FENTON BASED OXIDATION PROCESSES. Doctoral thesis, Universiti Teknologi PETRONAS.

SIONG , CHUA CHIN (2020) COMPARATIVE STUDY OF LENTIL EXTRACT AND GRAFTED LENTIL EXTRACT AS COAGULANTS IN WATER AND WASTEWATER TREATMENT. Masters thesis, Universiti Teknologi PETRONAS.

TY, PHUOR (2020) DEVELOPMENT AND APPLICATION OF THREE-DIMENSIONAL FINITE ELEMENT INTERFACE MODEL FOR SOIL-JACK-UP INTERACTION DURING PRELOADING. PhD. thesis, Universiti Teknologi PETRONAS.

Final Year Project

Perumal, Roshen (2020) FRAMEWORK FOR EFFECTIVE SAFETY COMPLIANCE IN CONSTRUCTION PROJECTS. [Final Year Project] (Submitted)

Yang , Shaun Jia Ming (2020) STIFFNESS ANALYSIS OF OFFSHORE GROUTED JOINTS USING DAMAGE DETECTION METHODS. [Final Year Project] (Submitted)

ABD HALIM, MUHAMMAD HAZIQ HAZIM (2020) MODELLING FOR SOIL EROSION AND RIVER SUSPENDED SEDIMENT. [Final Year Project] (Submitted)

AHMAD, SYAHMI (2020) THE INTERACTION OF ACTIVITY TRAVEL PATTERN, BUILT ENVIRONMENT AND AFFECTIVE EXPERIENCED ON SOCIAL HEALTH. [Final Year Project] (Submitted)

AHMAD TAJUDDIN, IFFAH NADHIRAH (2020) SAFETY PRACTICES FRAMEWORK FOR CONSTRUCTION PROJECT OF UNDERGROUND KVMRT STATION. [Final Year Project] (Submitted)

ANUAR, MOHAMAD ARIF AIMAN (2020) FRAMEWORK FOR EFFECTIVE COST CONTROL FOR SAFETY COMPLIANCE IN CONSTRUCTION PROJECTS. [Final Year Project] (Submitted)

Abd Rahim, Nur Ezzati Alya (2020) Framework for Effectiveness Human Resource Management in Compliance of Safety in Construction Industry. [Final Year Project] (Submitted)

Abdelaziz, Abdelaziz Abdelmahmoud (2020) Life Cycle Cost Analysis (LCCA) for Sustainable Construction Projects: BIM Application. [Final Year Project] (Submitted)

Abdul Halim , Nur Ain Syafiqah (2020) Designing of Bentonite Grout Mixture for Borehole Extensometer Application. [Final Year Project] (Submitted)

Abdul Rahim, Ameir Yusuf (2020) Fatigue Analysis of Relocatable Offshore Platform in Shallow Water Marginal Fields. [Final Year Project] (Submitted)

Abdul Rahman, Nurul Liyana ‘Izzati (2020) Laboratory Experiment To Determine Major Factors Controlling Landslides Triggered by Rising of Ground Water Level. [Final Year Project] (Submitted)

Ahmad, Niraku Rosmawati and Mohd Marzuki, Siti Nuruljannah (2020) Experimental Study: Geotechnical Properties of Uncemented Sandstone at Kati Formation, Seri Iskandar, Perak.‎. [Final Year Project] (Submitted)

Amirudin, Ashikin Mastura (2020) AN ANALYTICAL STUDY ON THE TENSIONAL INTEGRITY OF AN EXISTING DIAGRID STRUCTURAL SYSTEM. [Final Year Project] (Submitted)

Azizan, Nur Afiqah (2020) Erosion Susceptibility mapping using Machine Learning and GIS: A case study of Kelantan. [Final Year Project] (Submitted)

Azmi, Nurbazilah (2020) Framework for Effective Time Management Towards Safety Compliance in Construction Project. [Final Year Project] (Submitted)

Azmim, Mohamad Ridzwan (2020) OFFSHORE RENEWABLE ENERGY DEPLOYMENT IN MALAYSIA: A SURVEY STUDY. [Final Year Project] (Submitted)

Badrul Hisham, Shameen Miriam (2020) Feasibility Analysis of Mooring Systems for Floating Offshore Solar Farm (FOSF) Considering Environmental Impacts. [Final Year Project] (Submitted)

Che Wan Azman, Che Wan Nor Shahirah (2020) Evaluation of the Impact of Backwater on the Hydraulics Performance of Modules using FLOW-3D. [Final Year Project] (Submitted)

Chin , Shou Xian (2020) Influence of Plant Variation for Treatment Train on Hydrologic Performance for Stormwater Runoff Treatment. [Final Year Project] (Submitted)

Daniel, Dylan Au (2020) FLOW SIMULATIONS OF PIPELINE WITH VARYING DIAMETERS. [Final Year Project] (Submitted)

Eng, Zhen Qin (2020) Developing Economic Performance of Transportation Facilities in Tourism Area (Case Study: Ipoh Train Station). [Final Year Project] (Submitted)

Guest, Aaron William (2020) Parametric Study on Dynamic Analysis of Steel Beams and their Mode Shapes-Numerical Simulations. [Final Year Project] (Submitted)

Gunasegaran, Vinod Joshua (2020) Investigations of The Effect of Mooring Line Parameters On the Hydrodynamic Behavior of Semisubmersible Offshore Wind Turbine in Malaysia Water Environment – Physical Model Testing. [Final Year Project] (Submitted)

Hasani, Siti Sarah (2020) Erosion Susceptibility Mapping using GIS and MCDM: A case study in Kelantan. [Final Year Project] (Submitted)

Husnuddin, Aida Sofea Nurina (2020) Numerical Simulation of Directional Wave Hydrodynamic Forces: A Study of Surface Roughness. [Final Year Project] (Submitted)

ISMAIL MUBARAK, AHMAD SYAWAL IDDIL (2020) HEALTH AND SAFETY FOR INFRASTRUCTURE PROJECTS: PPE ADAPTATION. [Final Year Project] (Submitted)

Idris, Syaheera (2020) ii Comparative Assessment of Offshore Platforms as Artificial Reefs: Study of Sea Current, Sea Surface Temperature, and Water Depth in Malaysia. [Final Year Project] (Submitted)

Iskandar Fitri, Muhammad Affif (2020) Life-Cycle Cost Analysis Comparison on Power Generation Based on Natural Gas and Photovoltaic Modules. [Final Year Project] (Submitted)

JAMALUDDIN, MUHAMMAD REDZUAN (2020) IDENTIFICATION OF SUITABLE LOCATIONS OF OCEAN ENERGY IN LABUAN STATE - GIS APPROACHED. [Final Year Project] (Submitted)

KAMARUDIN, NUR KHALIDAH (2020) SPATIAL MODELLING OF FLOOD SUSCEPTIBILITY IN PERLIS USING GEOGRAPHIC INFORMATION SYSTEM (GIS) AND SUPPORT VECTOR MACHINE (SVM). [Final Year Project] (Submitted)

Kesavadasan, Thasaini Nambiar (2020) MARINE CURRENT ENERGY RESOURCE ASSESSMENT IN MALAYSIA. [Final Year Project] (Submitted)

Kian Hong, Anderson Chan (2020) Effects of Graphene on Mechanical Properties of Geopolymer Concrete. [Final Year Project] (Submitted)

Kong , Jian Fang (2020) CORROSION EFFECT ON INTEGRITY OF EXISTING OFFSHORE FIXED PLATFORM. [Final Year Project] (Submitted)

Kuan, Wei Sam (2020) The Interaction of Activity-Travel Pattern, Built Environment and Active Transport on Physical Health. [Final Year Project] (Submitted)

LEE , XIN YANG (2020) Integrated IBS Model for BIM Environment: Embodied Carbon Analysis. [Final Year Project] (Submitted)

LIM , TEIK HAN (2020) COMPARISON THE STRUCUTRAL PERFORMANCE OF FLY ASH GEOPOLYMER, HIGH PERFORMANCE AND HYBRID COMPOSITE CONCRETES WITHOUT SHEAR STIRRUPS. [Final Year Project] (Submitted)

Lau, Jia Shen (2020) Evaluation on New Natural Coagulant Aid in Water Treatment and its Life Cycle Assessment. [Final Year Project] (Submitted)

Lee , Jian Heng (2020) Last Planner System (LPS) for Industrialized Building System (IBS) Application in Construction Industry. [Final Year Project] (Submitted)

Leong , Jia Cong (2020) Experimental and Numerical Study on Mechanical Properties of Steel-Geopolymer Concrete-Steel Beam. [Final Year Project] (Submitted)

Liew, Zhen Shen (2020) Renewable Energy from Osmosis: Design and Model Pressure Retarded Osmosis System. [Final Year Project] (Submitted)

Lim Yong, Benjamin Hong (2020) EVALUATION OF ALONGSHORE SEDIMENT TRANSPORTS AT PANTAI TELUK NIPAH, PANGKOR ISLAND. [Final Year Project] (Submitted)

Lo , Jia Hao (2020) Behaviour of Thin-Walled Cylindrical Shell Storage Tank under Blast Impacts: Finite Element Analysis. [Final Year Project] (Submitted)

Loganathan, Kamalesh Reddy (2020) Chemical Resistivity of Rubberized Concrete with Steel Tire Wire. [Final Year Project] (Submitted)

Low, Dewon (2020) DEVELOPING A FOREST FIRE DISASTER MANAGEMENT SYSTEM USING GIS AND MACHINE LEARNING. [Final Year Project] (Submitted)

MD NASIR, NURUL AMIRA AMALINA (2020) CONSTRUCTED WETLAND SYSTEM FOR PEAT SOIL ECOSYSTEM RESTORATION AND WATER QUALITY ANALYSIS. [Final Year Project] (Submitted)

MD RIZA, FARAH NABILAH (2020) HIGHEST AND BEST USE ANALYSIS FOR REDEVELOPING THE ECONOMICAL SUSTAINABLITY OF HIGH-RISE BUILDING. [Final Year Project] (Submitted)

MUHAMMAD HISHAM, MUHAMMAD SAID FARHAN (2020) APPLICATION OF BIOCHAR FOR TREATMENT OF PRODUCED WATER. [Final Year Project] (Submitted)

Mahaletchumanan, Uthaiya Prakala (2020) Use of a Floating Breakwater in the Erosion Control at Coral Beach, Pangkor Island. [Final Year Project] (Submitted)

Mahindran, Kumeerthaasree (2020) Computational Modeling of Bacteria in Bioremediation of Oil in Lumut Seawater using Lattice Boltzmann Method. [Final Year Project] (Submitted)

Manimaran, Rajaletchumi (2020) A Review on the Effect of Sand Dune on the Hydrodynamic Properties of Rivers. [Final Year Project] (Submitted)

Md Nasir, Nurul Amira Amalina (2020) CONSTRUCTED WETLAND SYSTEM FOR PEAT SOIL ECOSYSTEM RESTORATION AND WATER QUALITY ANALYSIS. [Final Year Project] (Submitted)

Mior Hanapi, Mior Amirul Azam (2020) Life Cycle Cost Analysis of Highway Project. [Final Year Project] (Submitted)

Mohamad Faiz, Nuwairah Ilham Putri (2020) Framework for Quality Management System for Safety Compliance Implementation in Construction Projects. [Final Year Project] (Submitted)

Mohd Azlan, Mohamad Azwan (2020) Prediction of Water Availability for Paddy Crop: Case Study at Felcra Seberang Perak. [Final Year Project] (Submitted)

Mohd Khairi, Afnan Munir (2020) The Interaction of Activity-Travel Pattern, Built Environment and Physical Intensity on Physical Health. [Final Year Project] (Submitted)

Mohd Shamsul, Muhammad Amzar Hareez (2020) SPATIAL MODELLING OF FLOOD SUSCEPTIBILITY IN KELANTAN USING GIS AND RANDOM FOREST MACHINE LEARNING. [Final Year Project] (Submitted)

Mohd Zahid, Muhammad Afiq Aiman (2020) Dynamic Response Analysis of FPSO With Damaged Mooring Line And Multiple Damaged Mooring Lines. [Final Year Project] (Submitted)

NARUDDIN, MUHAMMAD AMIRUL HAQIMI (2020) The Impact of Urban Watershed to Hydrological Performance with The Presence of Bioretention System. [Final Year Project] (Submitted)

NORADHA, MUHAMMAD HAZEEQ (2020) CERTIFICATION OF APPROVAL WATER QUALITY ASSESSMENT ON TREATMENT TRAIN SYSTEM FOR STORMWATER RUNOFF. [Final Year Project] (Submitted)

Nasa Radzie, Dayana Nabilah (2020) Hydraulic Analysis of Floating Rubbish in Sungai Lumut Kiri with HEC-RAS. [Final Year Project] (Submitted)

Ng, Yee Yong (2020) Shoreline Mapping of Teluk Nipah Using Digital Shoreline Analysis System (DSAS) in ArcGIS with Tidal Correction. [Final Year Project] (Submitted)

Ng , Jia Yi (2020) Nutrient Removal in the Treatment of Batik Wastewater using Bench-Scale Sequencing Batch Reactor (SBR) System. [Final Year Project] (Submitted)

Ng , Weng Jie (2020) Extreme Loads on Jacket Structures : Effect of Higher Order Linearities and Momentum Flux Formulation. [Final Year Project] (Submitted)

PAT, KAR SENG (2020) EXPERIMENTAL AND ANALYTICAL STUDY ON STRUCTURAL BEHAVIOR OF GEOPOLYMER SANDWICH COMPOSITE BEAM. [Final Year Project] (Submitted)

Palaniappan, Pavitirakumar (2020) Techno Economic Analysis of Offshore Wind Turbine in Kudat, Sabah Malaysia. [Final Year Project] (Submitted)

R RAVICHANDRAN, THEVAKARAN (2020) DEFORMATION PROPERTIES OF RUBBERISED CONCRETE MODIFIED WITH STEEL TYRE WIRE. [Final Year Project] (Submitted)

R Sundaram, Ranjiivan (2020) Curing Methods on Early Strength of Geopolymer Concrete. [Final Year Project] (Submitted)

ROSMAN, MUHAMMAD SHAKYR (2020) Developing decision support system to redevelop urban facilities (cultural heritage). [Final Year Project] (Submitted)

Ramesh, Vishal Avinash (2020) Rapid Numerical Prototyping of Wind Turbine. [Final Year Project] (Submitted)

Ravinthiran, Thayalan (2020) Numerical Simulation of Buried Pipeline under Axial Soil Displacement. [Final Year Project] (Submitted)

Ray Louis, Vicmark Richard (2020) EVALUATION OF ADSORPTION PROCESS USING AGRICULTURAL WASTE USING RSM IN REMOVAL OF ORGANIC POLLUTANTS FROM PRODUCED WATER. [Final Year Project] (Submitted)

Rosman, Muhammad Harith Shah (2020) The Interaction of Activity Travel Participation, Built Environment and Social Intensity on Social Health. [Final Year Project] (Submitted)

Ruslan, Amirul Afiq (2020) Developing Value Based Decision-Making Model for Selecting Sustainable Material for Building. [Final Year Project] (Submitted)

SELVANATHAN, ALAN APOSTLER (2020) Experimental Study on the Effect of Mooring Line Failure on the Hydrodynamic Behaviour of Spread Moored FPSO. [Final Year Project] (Submitted)

SOO , SIN QUAN (2020) Investigating Properties of Interlocking Bricks with Rubber Glove Manufacturing Residue (RGMR) and Crumb Rubber. [Final Year Project] (Submitted)

Saari, Nurul Syahirunisa (2020) Production of Natural Aid Coagulant for Turbidity Removal in Kaolin Suspension. [Final Year Project] (Submitted)

Salim, Siddique Mohamad Yatim (2020) Numerical Simulation of Directional Wave Hydrodynamic Forces: A Study of Cylinder Arrays. [Final Year Project] (Submitted)

Santhanasamy, Rickey (2020) Investigation on the Mechanical and Morphological Properties of Regular and Irradiated Waste PET Modified Asphaltic Concrete Mixtures. [Final Year Project] (Submitted)

Selvaraju, Durgashini (2020) Lifting Analysis of an Offshore Bridge Structure that Connects Two Platforms. [Final Year Project] (Submitted)

Shu Ying, Amanda Ong (2020) Numerical Assessment of Reinforced Thermoplastic Pipe (RTP) with Crack under Spanning Condition. [Final Year Project] (Submitted)

Soo, Neng Wu (2020) Landslide susceptibility modelling using GIS and Random Forest Machine Learning. [Final Year Project] (Submitted)

Suherman, Sarah (2020) The Impact of Differential Subsidence on The Integrity of Offshore Platform Jacket Using Linear Static Analysis. [Final Year Project] (Submitted)

Suleiman, Nur Aqilah (2020) NUMERICAL SIMULATION OF FLOW PARAMETERS THROUGH SUBSURFACE DRAINAGE MODULE SYSTEM. [Final Year Project] (Submitted)

TANG, PANG NENG (2020) EFFECTS OF WAVE PERIOD ON WAVE TRANSMISSION AND REFLECTION FOR AN ARRAY OF GEOTUBE. [Final Year Project] (Submitted)

THOOY, KOK YAW (2020) NUMERICAL AND PARAMETRIC STUDY ON THE GEOPOLYMER CONCRETE CORE IN COMPOSITE SANDWICH SECTION. [Final Year Project] (Submitted)

Tan, Vi Nie (2020) Efficient Numerical Modelling of Extreme Waves. [Final Year Project] (Submitted)

Tan , Kai Xian (2020) Damage Detection of Offshore Structure Tubulars using Frequency Method. [Final Year Project] (Submitted)

Tan , Vi Nie (2020) Efficient Numerical Modelling of Extreme Wave. [Final Year Project] (Submitted)

Teik, Ang Hun (2020) Extraction, Characterisation, Optimisation in Chlorella vulgaris microalgae harvesting by Bael extract and Its Cost Benefit Analysis. [Final Year Project] (Submitted)

Thanapal, Praveena (2020) Investigation on Performances and Characteristic of PCM Modified Mastic. [Final Year Project] (Submitted)

Thanasegaran, Chanteini (2020) Computational Study on Effect of Seawater Physical Properties Towards Crude Oil: A Lattice Boltzmann for Solute Transport Approach. [Final Year Project] (Submitted)

Tidan, Deirdre Rinai (2020) Study On The Mechanical Performance Of Normal Concrete Due To Inclusion Of PVA Fibers And Silica Fume. [Final Year Project] (Submitted)

Vijayakumar, Kishankumar (2020) Study on The Effect of Polymerised Palm Oil on The Fatigue Performance of Hot Mix Asphalt. [Final Year Project] (Submitted)

Vincent, Sharvin (2020) FLEXURAL AND TENSILE STRENGTH OF RUBBERIZED CONCRETE WITH STEEL TYRE WIRE. [Final Year Project] (Submitted)

Wan Muhaimin, Wan Farra Ayesha (2020) New Method of Construction in Industrialised Building System. [Final Year Project] (Submitted)

Wee Yeong, Brennan Xiang (2020) ANALYSIS OF CORROSION RATES ACROSS VARIOUS WATER DEPTHS IN MALAYSIA TOWARDS THE IMPACT OF INTEGRITY ON OFFSHORE STRUCTURE. [Final Year Project] (Submitted)

Wong, Dai Le (2020) Organics Removal in the Treatment of Batik Wastewater using Bench-Scale Sequencing Batch Reactor (SBR) System. [Final Year Project] (Submitted)

Wong, Kai Wing (2020) Important Factors of Automated Monitoring of Quality and Quantity in Construction Projects. [Final Year Project] (Submitted)

Wong , Joel Weng Lok (2020) Structural Behavior of Novel Hybrid Composite Beams Made of Geopolymer Concrete and High-Performance Concrete (HPC). [Final Year Project] (Submitted)

Xiang En, Roy Chang (2020) PARAMETRIC ANALYSIS OF FLOATING SOLAR SYSTEM FOR MALAYSIAN OFFSHORE APPLICATIONS. [Final Year Project] (Submitted)

Xin Xian, Beryl Wong (2020) Value-Based Decision Making for Redeveloping Transportation Facilities(Case Study: Kapit Airport). [Final Year Project] (Submitted)

Yenn, Loo Chi (2020) Investigating the effects of graphene nanoplatelets on the mechanical properties of Engineered Cementitious Composite. [Final Year Project] (Submitted)

Yeoh, Jun Xiang (2020) Heat treatment of sludge and encapsulation into building blocks. [Final Year Project] (Submitted)

Zainal Abidin, Siti Yusrina (2020) The Investigation on The Effect of Vehicles Speed to The Pavement Performances of Malaysian Road. [Final Year Project] (Submitted)

Zambre, Aleesya Ellanie (2020) Rainwater Harvesting System for Generating Green Energy – Numerical Modelling. [Final Year Project] (Submitted)

Zhi Fu, Joidan Lau (2020) Prediction of Moisture Content Removal from Sludge by Artificial Neural Network Modelling. [Final Year Project] (Submitted)

Zuaini, Muhammad Nashriq Aiman (2020) Numerical simulation of directional wave hydrodynamic force: A study of diffraction effects. [Final Year Project] (Submitted)

Zulkiflee, Muhammad Hilman (2020) Life Cycle Cost Analysis (LCCA) on Excavators for Earthwork (Excavation and Earthmoving) in a Highway Project. [Final Year Project] (Submitted)

Zulkifli, Muhammad Amirhanafi (2020) Water Quality Analysis at Sungai Lumut Kiri and Floating Rubbish Problem. [Final Year Project] (Submitted)