Items where Department / MOR is "Mechanical" and Year is 2013

Group by: Creators | Item Type | No Grouping

Number of items: 224.

Ahmed Elmahdi, Anas Elrayah (2013) Study of Performance Enhancement of a Building in Tropical Climate. [Final Year Project] (Unpublished)

Arizam, Muhammad Hafizuddin Adha (2013) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN BUTT WELDING JOINT OF ASTM A36 PLATE AND ITS EFFECT ON FATIGUE CRACK GROWTH. [Final Year Project] (Unpublished)

Aziz, Muhammad Farhan (2013) Minimizing Preventive Maintenance Costs of An Equipment in Oil and Gas (O&G) Industry. [Final Year Project] (Unpublished)

DERAMAN, RAFFLELLA (2013) A Study on Blade Performance of Transverse Axis Wind Turbine Mounted on a Rooftop. [Final Year Project] (Unpublished)

Hamdan, Muhamad Faris (2013) CFD Modelling of Supersonic Wet Gas Separator. [Final Year Project] (Unpublished)

Ismail, Mohd Shahrul Ezwan (2013) Corrosion Behavior of Intumescent Coated Steel In Seawater Environment. [Final Year Project] (Unpublished)

Ismail, Muhammad Iskandar (2013) The Effects of Surfactant on Combustion Characteristics of Emulsified Diesel Fuel. [Final Year Project] (Unpublished)

Mohd Zolkafly, Muhammad Ariff Zaky (2013) Reverse Engineering of PDC Drill Bit. [Final Year Project] (Unpublished)

Mohd Zulkepli, Muhamad Aarif Billah (2013) Mathematical Modelling to Predict Nitrided Layer Thickness of Low Temperature Gas and Plasma Nitriding of AISI 316 L Stainless Steel (Austenitic). [Final Year Project] (Unpublished)

Ping, Sharon Lee Lai (2013) Elementary process identification of solar carbon dioxide (CO2) fueling. [Final Year Project] (Unpublished)

ZULKIFLI, MOHD AMRI AZRI (2013) Investigation on Sensitization of Nitrided AISI 316L Austenitic Stainless Steel at Intermediate Temperature. [Final Year Project] (Unpublished)

Zulkifli, Siti Nadiah (2013) Cornering Stability Analysis of Double Decker Bus at KM15 of Cameroon Highlands – Simpang Pulai Road. [Final Year Project] (Unpublished)

.SANTHIRASEGARAN, JEIHARISH S.V (2013) IMPROVEMENT OF SOLAR PHOTOVOLTAIC MODULE EFFICIENCIES THROUGH WATER COOLING AND DEBRIS REMOVAL. [Final Year Project] (Unpublished)

A. William, Moshey (2013) BULLHEADING II TWO PHASE SIMULATION OF A DEFINITIVE WELL KILL. [Final Year Project] (Unpublished)

A/L Krishnasammy, Puventhan (2013) Experimental Analysis Of Modified Roof Extractor For Wind Power Conversion In Solar Chimney Application. [Final Year Project] (Unpublished)

AB MANAS, MOHAMAD FARIS (2013) STUDY ON THE EFFECTS OF BUTT WELD JOINT BEVEL ANGLES ON TENSILE PROPERTIES OF ALUMINUM ALLOY 6061. [Final Year Project] (Unpublished)

AB RAZAK, NIK MOHD HAFIZZAL (2013) ENERGY RECOVERY HEAT EXCHANGER PERFORMANCE IN BUILDING’S AIR CONDITIONING SYSTEM. [Final Year Project] (Unpublished)

ABD GAFAR, AMIR HAZWAN (2013) DEVELOPMENT OF RISK ASSESSMENT MODEL FOR GAS TURBINE. [Final Year Project] (Unpublished)

ABD JAMIL, AINI (2013) Co-gasification of Oil Palm Fronds, Wood Chips and Sugarcane Bagasse for Power Generation. [Final Year Project] (Unpublished)

ABD LATIF, MUHAMAD FAUZAN (2013) Effects of Biopolymer as Drag Reducing Agent on Characteristics of Crude Oil. [Final Year Project] (Unpublished)

ABDUL HAMID, MUHAMMAD HAZIEM (2013) EXPERIMENTAL STUDY ON PIPE FLUID INDUCED VIBRATION. [Final Year Project] (Unpublished)

ABDUL HANAN, MOHD SYAHID (2013) CENTRIFUGAL COMPRESSOR VIBRATION ANALYSIS. [Final Year Project] (Submitted)

ABDUL LATIF, MUHAMMAD FADHIL (2013) Friction Stir Welding (FSW): The effect of tilting angle. [Final Year Project] (Unpublished)

ABDUL RANI, MOHD AMIRUL FIKRI (2013) STUDY OF POSSIBLE FIRE DOOR MATERIALS MADE FROM ALTERNATIVE WASTE ITEMS. [Final Year Project] (Unpublished)

ABDUL RAZAK, ABDUL FALIQ QUSHAIRI (2013) Estimating Solar Energy Potential in Perak using Clearness Index and Artificial Neural Network. [Final Year Project] (Unpublished)

ABU HAMIN, MOHD ZULKIFLY (2013) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESS IN WELDED THICK PLATES OF A SINGLE V BUTT WELD WITH DIFFERENT INCLUDED BEVEL ANGLES. [Final Year Project] (Unpublished)

AMIR, NORLAILI (2013) DEVELOPMENT OF MINERAL AND CARBON FIBRES REINFORCED INTUMESCENT COATINGS FOR STEEL STRUCTURES. PhD. thesis, Universiti Teknologi PETRONAS.

ANANDARAJAH, YASHADINI (2013) UTILIZATION OF DIRECT SOLAR RADIATION FOR INDOOR LIGHTING. [Final Year Project] (Unpublished)

Ab Manaf, Nuratiqah (2013) Remaining Fatigue Life Assessment by Using Crack Growth Model. [Final Year Project] (Unpublished)

Abd El-Aziz, Omar Eid Khorshed (2013) Subsea Production Control System Modelling. [Final Year Project] (Unpublished)

Abd Karim, Muhammad Amin (2013) The Development of Reliability Analysis Toolkit (RAT) For Analyzing Plant Maintenance Data. [Final Year Project] (Unpublished)

Abd Koha, Mohd Muslim (2013) Subsea Production System (SPS) Control Modelling. [Final Year Project] (Unpublished)

Abdul Hamid Albakri, Mohammad Faris Al Hanis (2013) A Study of Chemical Compatibility between Corrosion Inhibitor and Biocide in Offshore Application. [Final Year Project] (Unpublished)

Abdul Kadir, Mohammad Faizal (2013) DESIGN SUBSEA POWER GENERATION SYSTEM. [Final Year Project] (Unpublished)

Abdul Malek, Raez Edriezal (2013) Design and Site Implementation of Hydro-electrifier. [Final Year Project] (Unpublished)

Abdul Manan, Muhammad Aiman (2013) Effectiveness of Air and Biomass Heating using Waste Heat from a Gasification System. [Final Year Project] (Unpublished)

Abu, Fadhilatul Hikmah (2013) Design and Analysis of Recovery Net Landing for UAV ALUDRA MR-01. [Final Year Project] (Unpublished)

Abu Bakar, Muhammad Al-Afiq (2013) Tensile Strength Of Polyester/Woven Kenaf Composites. [Final Year Project] (Unpublished)

Adanan@Adnan, Ahmad Yumnie (2013) Controlling Sand Production Problem in Open-Hole Completion; a Case Study. [Final Year Project] (Unpublished)

Adnan, Nurfatin Ezzuni (2013) A study of hardness and the sensitization of nitrided martensitic stainless steel during cooling down process. [Final Year Project] (Unpublished)

Afandi, Muhammad Syafiq (2013) The Study of Flow Dynamics in Long Pipeline for the Transport of Carbon Dioxide (CO2). [Final Year Project] (Unpublished)

Ahmad Rassdi, Nurul Hidayah (2013) Cellulosic-Based Packaging Material from Corn Husk. [Final Year Project] (Unpublished)

Ahmad Redzuan, Ahmad Zhafran (2013) Development of Redundancy Model for Co-generation Plant. [Final Year Project] (Unpublished)

Albarody, Thar M. Badri (2013) DYNAMIC ANALYSIS OF LAMINA TED COMPOSITE MAGNETO-THERMO-ELECTRO-ELASTIC SHELL. Doctoral thesis, Universiti Teknologi PETRONAS.

Ali, Aboubaker Abdalla Ibrahim (2013) Development of Fuel Briquettes from Biomass Residue. Masters thesis, Universiti Teknologi PETRONAS.

Aminudin, Muhammad Syahmi (2013) Analysis of Carbon Dioxide (CO2) Emission by Heat Recovery Steam Generator (HRSG). [Final Year Project] (Unpublished)

Anuar, Nor Hazwani (2013) Physical Properties of Rice Husk Packaging Material. [Final Year Project] (Unpublished)

Awang Besar, Erfan Ruzalfian (2013) Development of Conceptual Design Support System for Mechanisms. [Final Year Project] (Unpublished)

Azlan, Uzair Aslam (2013) Solar Passive Cooling: Solar Chimney for Natural Ventilation. [Final Year Project] (Unpublished)

Azman, Athira (2013) The Effect Of Voltage To Welded Aluminum And Steel By Using Gas Metal Arc Welding (GMAW). [Final Year Project] (Unpublished)

Azman, Usamah (2013) Analysis of Whirl Speed of Rotor-bearing System Supported on Fluid Film Bearing. [Final Year Project] (Unpublished)

Bong, David (2013) Development of Thermoelectric Generator (TEG) For Energy Recovery in Perodua Myvi. [Final Year Project] (Unpublished)

CHE A. HALIM, FAHMI (2013) Characterization of Double-sided Friction Stir Welding (FSW). [Final Year Project] (Unpublished)

CHONG, YEW POR (2013) INVESTIGATION ON THE EFFECT OF THE CHIMNEY CUP ON THE NATURAL UPWARD DRAFTING. [Final Year Project] (Unpublished)

Choi , Y ee Xiong (2013) A Study on the Effect of Steam Leakage to the Heat Rate of Steam Power Plant. [Final Year Project] (Unpublished)

Claudius, Rick Raynold (2013) Fatigue Crack Initiation and Propagation on Nitrided Ferritic Surfaces in Stainless Steel 439. [Final Year Project] (Unpublished)

DAHAN, MUHAMMAD FARHAN (2013) Frictional Contact Stress Analysis of Involute Spur Gear by Finite Element Method. [Final Year Project] (Unpublished)

EhsanulHaqGlani, Syed (2013) DESIGN AND FABRICATION OF WIND POWER EXPERIMENT LAB KIT. [Final Year Project] (Unpublished)

FATAH, MARTIN CHOIRUL (2013) MECHANISTIC AND KINETIC STUDIES OF MICROBIOLOGICALLY INFLUENCED CORROSION(MIC) IN THE PRESENCE OF DOMINANT SULPHATE REDUCING BACTERIA (SRB) METABOLIC SPECIES. PhD. thesis, Universiti Teknologi PETRONAS.

GEBREMARIAM, MEBRAHITOM ASMELASH (2013) THE EFFECTS OF SILICA SAND (Si02) AND ZIRCONIA (Zr02) ON THE MECHANICAL AND THERMAL PROPERTIES OF THE PRESSURELESS SINTERED Al203-Si02-Zr02 COMPOSITE. PhD. thesis, Universiti Teknologi PETRONAS.

HASAN AZHARI, MUHAMMAD (2013) DYNAMICS OF MAGNETICALLY SUPPORTED RIGID ROTOR IN AUXILIARY BEARING. [Final Year Project] (Unpublished)

HELMY, MOHAMED MAHMOUD ASHRAF (2013) PARAMETRIC SENSITIVITY ANALYSIS FOR THE PERFORMANCE OF STEAM JET EJECTOR. [Final Year Project] (Unpublished)

HUSSIN, HILMI BIN HUSSIN (2013) FRAMEWORK FOR RELIABILITY, MAINTAINABILITY AND AVAILABILITY ANALYSIS OF GAS PROCESSING SYSTEM DURING OPERATION PHASE. PhD. thesis, Universiti Teknologi Petronas.

Hamssin, Mohamad Fadzley (2013) ANALYSIS OF PINCH AND APPROACH POINT OF HEAT RECOVERY STEAM GENERATOR (HRSG) OF COGENERATION PLANT. [Final Year Project] (Unpublished)

Haris, Farhana (2013) Comparative Study on the Mechanical and Physical Properties of Un-nitriding and Nitriding of 430 Ferritic Stainless Steel. [Final Year Project] (Unpublished)

Haris, farhana (2013) Comparative Study on the Mechanical and Physical Properties of Un-nitriding and Nitriding of 430 Ferritic Stainless Steel. [Final Year Project] (Unpublished)

Hassan, Najibah (2013) Thermal Analysis of Carbon Fiber Composite Structure by Finite Element Analysis. [Final Year Project] (Unpublished)

Hata Suhaimi, Nurafiqah (2013) S-Cane Pack. [Final Year Project] (Unpublished)

Huei Ming, Low (2013) Numerical Simulation of Two-phase Separation in T-junction. [Final Year Project] (Unpublished)

ISMAIL, FAISAL (2013) Comparative Study of the Microstructure, Mechanical and Thermal Properties of Nitrided and Base Ferritic SS439 Stainless Steel Rod. [Final Year Project] (Unpublished)

IYENAGBE, UGHEOKE BENJAMIN (2013) PRODUCTION AND CHARACTERIZATION OF SILICA REFRACTORY FROM RICE HUSK. PhD. thesis, Universiti Teknologi PETRONAS.

Ibrahim, Muhammad Syaril Azril (2013) Identification and Characterization of Corrosion Scale of Cooler Heat Exchanger. [Final Year Project] (Unpublished)

Ismail, Izat Emir (2013) Mechanical Properties of Drilling Defect Induced Glass Fiber Epoxy Composites Developed By Resin Infusion Technique. [Final Year Project] (Unpublished)

Jahir, Mohd Rozairie (2013) Conceptual Design Support Tool for Subsea Equipment. [Final Year Project] (Unpublished)

Jalilluddin, Amir Fahmi (2013) Development of Fatigue Reliability Model Using Spreadsheet (Steel Structures). [Final Year Project] (Unpublished)

Jun Li, Khor (2013) Residence Time Distribution and Hydrodynamics Studies of a Swirling Fluidized Bed. [Final Year Project] (Unpublished)

K.V., SREEJAYA (2013) PARAMETRIC STUDY OF ROOF TOP SOLAR CHIMNEY. PhD. thesis, Universiti Teknologi PETRONAS.

KAMARUDIN, NAQIB HAKIM (2013) DEVELOPMENT OF FRAMEWORK USING GROUP TECHNOLOGY APPROACH IN ESTIMATING FABRICATION TIME OF SUBSEA MANIFOLD. [Final Year Project] (Unpublished)

KEAT, BEH HARK (2013) THE DESIGN OF STRUCTURE FOR LIFTING HEAVY LOAD. [Final Year Project] (Unpublished)

Kah Ling, Isabel Goh (2013) Estimation of Time between Failures and Time to Repairs of a Repairable System Based On Performance Data. [Final Year Project] (Unpublished)

Kamaruddin, Nur Zatil Ilham (2013) Tensile Strength of Woven Kenaf Reinforced High Density Polyethylene (HDPE) Composites. [Final Year Project] (Unpublished)

Khairuddin, Muhammad Hariz (2013) Mechanical and Physical Effect of Nitriding AISI 316L Austenitic Stainless Steel at Various High Temperatures and Different Gas Nitriding Methods. [Final Year Project] (Unpublished)

Khamis, Kamarul Azrin (2013) Vehicle Scheduling System. [Final Year Project] (Unpublished)

Lee, Holinson (2013) EFFECT OF FUNCTIONALIZATION ON THE STRENGTH OF MULTI-WALL CARBON NANOTUBES-POLYPROPYLENE (MWCNTs-PP) COMPOSITE. [Final Year Project] (Unpublished)

Loqman, Muhammad Aliff Ashman (2013) Conceptual Design Support Tool For Offshore Platform Jacket Design. [Final Year Project] (Unpublished)

MAHAMAT, AL TIDJANI ZAKARIA (2013) SYNTHESIZING ANDEVALUATION OFNEWCOPPER-TUNGSTEN BASED EDM ELECTRODE FOR MACHINING HARDENED MATERIALS. PhD. thesis, Universiti Teknologi PETRONAS.

MD SHAHSAZIZAN, IKHWAN (2013) MODELING AND SIMULATION OF A PERPETUAL PIGGING MECHANISM. [Final Year Project] (Unpublished)

MEKBIB ATNAW, SAMSON (2013) GASIFICATION OF OIL PALM FRONDS IN A DOWNDRAFT GASIFIER. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMAD ALI, MOHAMAD ROZAIDI (2013) ESTABLISHING CORRELATION BETWEEN LEAF SPRING’s SPECIFICATIONS AND CAMBER DROP. [Final Year Project] (Unpublished)

MOHAMAD FARID, AIDIL AIZAT (2013) FACTORS AFFECTING PLASTERING EFFECT IN CASING WHILE DRILINNG. [Final Year Project] (Unpublished)

MOHAMAD KHAIRI, MUHAMMAD SYAFIQ (2013) COMPARATIVE STUDY ON HONEYCOMB STRUCTURE FOR WEIGHT REDUCTION OF GANGWAY MONORAIL. [Final Year Project] (Unpublished)

MOHAMAD NOOR IMAN, Mohd Nor (2013) A STUDY OF TORQUE VECTORING AND TRACTION CONTROL FOR AN ALL-WHEEL DRIVE ELECTRIC VEHICLE. [Final Year Project] (Unpublished)

MOHAMED, MOHAMED OSMAN ABDALLA (2013) ENERGY SAVINGS AND SPEED IMPROVEMENT IN LINEAR POWER HYDRAULIC ACTUATORS USING A SELF-ACTUATED FLOW CONTROL VALVE. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMMADPOUR, EHSAN (2013) TENSILE BEHAVIOR EVALUATION OF CARBON NANOTUBE/POLYPROPYLENE COMPOSITES USING NONLINEAR FINITE ELEMENT MODELING. PhD. thesis, Universiti Teknologi PETRONAS.

MOHD SALEH, MOHAMMAD IZZAT (2013) GAS TURBINE PERFORMANCE AT VARYING AIR INLET TEMPERATURE. [Final Year Project] (Unpublished)

MOHD ZAMRI, MUHAMMAD ZUL IRFAN (2013) EXPERIMENTAL ANALYSIS OF COMPATIBILITY BETWEEN CORROSION INHIBITOR AND BIOCIDE USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY. [Final Year Project] (Unpublished)

MOSTAFA MOHAMED HEIKAL, RAGHDA MOHAMED (2013) Flow Distribution Inside An Air Conditioning Distributor Using FLUENT Simulation. [Final Year Project] (Unpublished)

MUHAMMED JUSOFFE PEREIRA, MUNTAQIM SHAH PEREIRA (2013) SIMULATION OF OIL – WATER INTERACTION AT DOWNHOLE. [Final Year Project] (Unpublished)

MUSTAFA MUSA, ABDEL HAFIZ (2013) CORROSION INHIBITION OF X52 STEEL IN HIGH PRESSURE CARBON DIOXIDE (C02) ENVIRONMENT. PhD. thesis, Universiti Teknologi PETRONAS.

Mahamed Salleh, Afdzal Zullah (2013) Computer Aided Design of a Deepwater Floater. [Final Year Project] (Unpublished)

Mansor, Amnah Bashirah (2013) Study of Characteristics of Contaminants during Eggs Hatching Using Incubator. [Final Year Project] (Unpublished)

Mansor, Muhammad Fadhil (2013) NATURAL CONVECTION HEAT LOSS IN BUILDINGS. [Final Year Project] (Unpublished)

Mariapan, Kohila (2013) Sludge Calorific Value Mapping and Potential Energy Recovery for Malaysia. [Final Year Project] (Unpublished)

Mazlan, Mohamad Haiqal (2013) DESIGN AND COMPARITIVE THERMAL ANALYSIS OF CONSTRUCTAL COOLING CHANNEL. [Final Year Project] (Unpublished)

Mazlan, Muhamad Muaz (2013) Vibration control of rotor-shaft system with electromagnetic exciter. [Final Year Project] (Unpublished)

MdYunus, Ahmad Faiz (2013) COMPARATIVE STUDY ONMANUFACTURING PROCESSES OFA SWIRLER CASING. [Final Year Project] (Unpublished)

Mohamad, Wan Farhana (2013) Development of Mineral Based Intumescent Fire Retardant Coating for Structural Applications. Masters thesis, Universiti Teknologi PETRONAS.

Mohamed, Hisyam (2013) COMPUTATIONAL FLUID DYNAMIC MODELLING OF FIRE INCIDENT. [Final Year Project] (Unpublished)

Mohammad Latpi, Aliff Idham (2013) ENDURANCE INVESTIGATION OF NITRIDE FERRITIC STAINLESS STEEL SS439 UNDER TORSIONAL LOADING. [Final Year Project] (Unpublished)

Mohammad Noor, Mohd Amri (2013) Offshore Pipeline Reliability Assessment Using Degradation Analysis and P-F Interval Model. [Final Year Project] (Unpublished)

Mohammed, Badrulzzaman (2013) Nitriding of AISI 316L Austenitic Stainless Steel at Low Temperature for the Enhancement of Surface Properties and Corrosion Properties. [Final Year Project] (Unpublished)

Mohd Arif, Muhammad Nor Hakim (2013) Mechanical Design and Dynamic Analysis of Pipe Crawling Robot for Internal Gas Pipeline Inspection. [Final Year Project] (Unpublished)

Mohd Hashim, Mohamad Haziq Faiz (2013) INVESTIGATING THE EFFECT OF COIL PLATES ON THE PERFORMANCE OF FIRE TUBE STEAM PACKAGED BOILER USING SIMULATION SOFTWARE. [Final Year Project] (Unpublished)

Mohd Kamal, Eliya Farah Hana (2013) Effects of Alkali-Silane Treatment on Tensile Strength of Woven Kenaf Reinforced Polypropylene Composites. [Final Year Project] (Unpublished)

Mohd Mohtar, Nurulhusna (2013) Vibration Analysis of Centrifugal Pump. [Final Year Project] (Unpublished)

Mohd Noor, Nor Fakhrul (2013) Carbon Nanotube Reinforced Aluminium Matrix Produced by Friction Stir Processing. [Final Year Project] (Unpublished)

Mohd Noor, Nursyazana (2013) Investigate the Dispersion and Suspension of Zinc and Silver Nano additives in Nano composites. [Final Year Project] (Unpublished)

Mohd Puad, Mohd Munir Effendy (2013) Effects of Ultraviolet and Rain on the performance of Fire Retardant Coating. [Final Year Project] (Unpublished)

Mohd Yusoff, Nik Zul Syafiq Affandi (2013) THE EFFECTIVE DURATION OF GAS NITRIDING PROCESS OF AISI 316L. [Final Year Project] (Unpublished)

Mohd Zin, Muhammad Zaki (2013) STUDY OF JATROPHA CURCAS BIODIESEL BLEND WITH FOSSIL DIESEL THERMAL CHARACTERIZATION, ENGINE PERFORMANCE AND EMISSION COMPARE TO FOSSIL DIESEL. [Final Year Project] (Unpublished)

Mohd. Ariff, Mohd. Hazwan (2013) Characterizations of Sprays of Modified Starch Solution at Elevated Temperature for Particle Coating Application. [Final Year Project] (Unpublished)

Muhammad Idris, Muhammad Fareez (2013) OIL-SAND PARTICLES (SOLID-LIQUID) PASSIVE SEPARATION IN PIPING SYSTEM. [Final Year Project] (Unpublished)

Mustafa, Afildhatul Nashima (2013) STUDY ON THE EFFECT OF VOIDS ON RESTART PUMPING OF GELLED CRUDE OIL IN PRODUCTION PIPELINE. [Final Year Project] (Unpublished)

Nelson, Kevin (2013) Entrance Length of Polymer Flows. [Final Year Project] (Unpublished)

Norahmad Shah, Amira Nabilla (2013) Development of Maintainability Analysis Toolkit (MAT) for Analysing Plant Maintenance Data of Gas Processing Plant at Operational Phase. [Final Year Project] (Unpublished)

Norashid, Muhammad Syukri (2013) MICROSTRUCTURE AND MATERIAL FLOW INVESTIGATION OF DISSIMILAR FRICTION STIR WELDED PLATES. [Final Year Project] (Unpublished)

Nordi, Nor Helmi (2013) Tensile Strength of Polyoxymethylene/Carbon Fiber/Glass Fiber Hybrid Composite. [Final Year Project] (Unpublished)

Nordin, Nazarul (2013) SOLAR WATER HEATER SYSTEMS FOR COMMERCIAL BUILDINGS. [Final Year Project] (Unpublished)

PALANISAMMY, KALIDASAN (2013) THERMOELECTRIC AIR COOLING FOR CAR. [Final Year Project] (Unpublished)

PATTHI, HAMDAN (2013) DEVELOPMENT OF EXCEL-BASED RELIABILITY MODEL FOR SYSTEMS WITH INCREASING/DECREASING FAILURE RATES. [Final Year Project] (Unpublished)

PATTHI, UMAR (2013) INVESTIGATION OF PHYSICAL AND MECHANICAL PROPERTIES OF FRICTION STIR WELDING ON ALUMINUM 6092/SIC/25P/T6 WELDED PLATES. Masters thesis, UTP.

Past Year Exam Question (2013) MAB3043 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 1023 MCB 1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 1052 MCB 1012 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 2053 MCB 2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 2063 MCB 2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 2072 MCB 3043 MECHANICS OF MACHINES. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 2094 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 3023 MCB 3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 3033 MCB 3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4023 MCB 3103 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4113 ENGINE DESIGN. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4213 ALTERNATIVE ENERGY. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4223 ENERGY CONVERSION AND MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4313 ADVANCED MANUFACTURING TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4413 ADVANCED ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4423 CORROSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2013) MBB 4513 FACILITIES ENGINEERING, TRANSPORTATION AND STORAGE. [Past Year Examination Question]

Past Year Exam Question (2013) MBB1023 MCB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB2063 MCB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2013) MBB3023 MCB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB4123 HYBRID VEHICLES. [Past Year Examination Question]

Past Year Exam Question (2013) MBB4133 VEHICLE DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2013) MBB4223 ENERGY CONVERSION AND MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2013) MBB4423 CORROSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2013) MBB4433 FAILURE ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB 1033 MBB 2083 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2013) MCB 2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2013) MCB 2023 MBB 2013 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2013) MCB 2034 MBB 2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB 2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB 3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2013) MCB2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2013) MCB2023 MECHANICAL ENGINEERING I. [Past Year Examination Question]

Past Year Exam Question (2013) MCB2034 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB2043 MBB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3033 MBB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3043 MECHANICS OF MACHINE. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3063 MBB2022 COMPUTER AIDED. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3083 MBB3043 MECHANICAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3092 MECHATRONICS. [Past Year Examination Question]

Past Year Exam Question (2013) MCB3103 VIBRATTON. [Past Year Examination Question]

Peng Sheng, Lim (2013) Modelling of Axial Spring Stiffness in Active Vibration Controlled Drilling. [Final Year Project] (Unpublished)

RASIP, NASIRUDDIN ZHARIFF (2013) DESIGN FOR MANUFACTURING WITH RAPID PROTOTYPING. [Final Year Project] (Unpublished)

RAZALI, MOHAMAD FIRDAUS (2013) COOPERATIVE MANIPULATORS. [Final Year Project] (Unpublished)

REDUAN, ALLYA RADZIHAN BINTI REDUAN (2013) Performance Investigation of Transcritical Carbon Dioxide Refrigeration Cycle. [Final Year Project] (Unpublished)

ROSLI, RHAISHAZRIN AMIRUL IQMA (2013) Gear Faults Analysis Using Finite Element Method. [Final Year Project] (Unpublished)

Ragupathy, Panjaabegesan (2013) DIGITAL IMAGE CORRELATION APPLICATION IN TENSILE TEST FOR ALUMINIUM ACCORDING TO ASTM E-8 STANDARD. [Final Year Project] (Unpublished)

Razali, Mohamad Firdaus (2013) COOPERATIVE MANIPULATORS. [Final Year Project] (Unpublished)

Razlan, Muhammad Fudzail (2013) Coordination of Multiple Mobile Robots. [Final Year Project] (Unpublished)

Rizal Nikman, Erhan Nikman (2013) Preliminary investigation of corrosion surfaces under coating on a plate using IR thermal imaging camera. [Final Year Project] (Unpublished)

Rosdi, Fatin Amalina (2013) Enhancement of Materials Surface Properties via Case Hardening Process: Metals Substrate in Silica Sand Bath. [Final Year Project] (Unpublished)

Rosli, Ahmad Aizat (2013) INVESTIGATION OF THE IMPACT OF IMPERFECTION REPAIR AND MAINTANENCE TO SYSTEM AVAIBILITY. [Final Year Project] (Unpublished)

SAHAR, MOHAMAD ISKANDAR (2013) Vehicle Body Design and Analysis of a Practical, Fuel Efficient City Concept Car. [Final Year Project] (Unpublished)

SARU @ SARUDDIN, MUHAMMAD ZUL „AFIF (2013) ENHANCEMENT OF MATERIALS SURFACE PROPERTIES VIA SURFACE COATING PROCESS: POLYMER SUBSTRATE IN SILICA SAND BATH. [Final Year Project] (Unpublished)

SA’AT, MOHD NAJIB (2013) THERMAL CHARACTERIZATION OF JATROPHA BASED BIODIESEL BLEND WITH FOSSIL DIESEL USING TGA. [Final Year Project] (Unpublished)

SHAMUGAM, JAYKANESH (2013) THERMAL SHRINKAGE AND GAS VOIDS FORMATION OF WAXY CRUDE OIL. [Final Year Project] (Unpublished)

SHARIFUTDIN, NUR SALAM (2013) A STUDY OF TORQUE VECTORING AND TRACTION CONTROL FOR A PARALLEL SPLIT HYBRID ELECTRIC VEHICLE. [Final Year Project] (Unpublished)

SIONG, HO CHIT (2013) Modelling and Simulation of Oil Production Tubing Dynamic and Static Characteristics due to Fluid Dynamic Loading. [Final Year Project] (Unpublished)

SUFFIAN, MUHAMMAD HAZIM (2013) TOWARDS A MORE ACCURATE FLOW RATE ESTIMATION TECHNIQUE FOR OIL SPILLS FROM PIPELINES. [Final Year Project] (Unpublished)

Saharudin, Muhammad Naim Al Amin (2013) A STUDY OF ALUMINUM HONEYCOMB IMPACT ATTENUATOR FOR NEIGHBORHOOD ELECTRIC VEHICLES. [Final Year Project] (Unpublished)

Salehuddin, Muhammad Hazeeq (2013) Effect of Varying Air Flow and Types of Paper on Heat Exchanger of Energy Recovery System. [Final Year Project] (Unpublished)

Sallahuddin, Ahmad Nadzrin Shah (2013) Development of an Excel Based Spreadsheet of Analytical Hierarchy Process And Decision Making Grid For Maintenance Policy Decision. [Final Year Project] (Unpublished)

Seng, Sook Harn (2013) Hydrate Formation in Multiphase Flow in Pipe. [Final Year Project] (Unpublished)

Sern, Chew Jay (2013) Wellbore Plastering during CasingwhileDrilling Prediction. [Final Year Project] (Unpublished)

Sern, Tan Yinn (2013) Experimental Studies on the Wavy Regime in Swirling Fluidized Bed. [Final Year Project] (Unpublished)

Shahbudin, Mohamad Khairul Azwan (2013) Glass Fiber Reinforced-Fire Retardant Composites For Offshore Platforms Application. [Final Year Project] (Unpublished)

Shahimi, Muhammad Syamil (2013) Detection of Corrosion Under Insulation Using Infrared Thermography. [Final Year Project] (Unpublished)

Shamsudin, Nur Ain Syafiqah (2013) Infrared Thermography Inspection on Potential Failures of Rotating Equipment. [Final Year Project] (Unpublished)

Shummugham, Suntharesar (2013) VEHICLE DRIVETRAIN MODELING AND ANALYSIS FOR AN ADVANCED DRIVETRAIN OF A CITY CONCEPTCAR. [Final Year Project] (Unpublished)

Sia An An, Clare Marie (2013) DYNAMIC ANALYSIS OF A RECIPROCATING COMPRESSOR. [Final Year Project] (Unpublished)

Talipov, Rustam (2013) ANALYTIC HIERARCHY PROCESS APPROACH FOR SELECTION AND EVALUATION OF MAINTENANCE STRATEGY. [Final Year Project] (Unpublished)

WONG , CHEE KING (2013) Studies on a Two-layer Swirling Fluidized Bed (SFB). [Final Year Project] (Unpublished)

Wahi, Nur E’zzati (2013) Study on Combustions Characteristics of Diesel-Vegetable Oil Blended using Industrial Fuel Burner. [Final Year Project] (Unpublished)

Wan Mohd Noh, Wan Najlin (2013) Surface Roughness of Stainless Steel by Micro-Milling for Biomedical Applications. [Final Year Project] (Unpublished)

Wei Wen, Jeremy Lo (2013) PROPOSAL FOR EFFICIENT METHODS TO PRODUCE CURVED PISTON FOR MASS PRODUCTION. [Final Year Project] (Unpublished)

Yahaya, Muhammad Syazwan Azrie (2013) Microstructure and Hardness Investigation of Different Welding Passes in Weld Zones. [Final Year Project] (Unpublished)

Yau Kin, Lau (2013) Energy Conservation in Buildings. [Final Year Project] (Unpublished)

ZAINAL, ZA’IM AZWAN (2013) PERFORMANCE STUDY OF THE SOLAR-POWERED ABSORPTIVE REFRIGERATION PROCESS. [Final Year Project] (Unpublished)

ZARAWI, ZULFADHLI (2013) Investigation of Malaysian Parang Manufacturing Quality Variation with respect to Chemical, Mechanical and Physical Properties. [Final Year Project] (Unpublished)

ZEWGE, MESFIN GIZAW (2013) STEP COMPLIANT APPROACH FOR TURN-MILL OPERATIONS. PhD. thesis, Universiti Teknologi PETRONAS.

Zainuddin, Mohamed Zakiran (2013) Optimal Design of Wheelchair Drive Mechanism. [Final Year Project] (Unpublished)

Zainudin, Muhammad Afif (2013) IMPROVING OF MANUFACTURING PRODUCTIVITY THROUGH SIMULATION. [Final Year Project] (Unpublished)

Zainudin, Muhammad Hazwan (2013) STUDY OF THERMALLY DRIVEN SORPTION CHILLER. [Final Year Project] (Unpublished)

Zaley, Mohammad Yusof (2013) Mechanical Properties Study of Recycled Machinable Wax. [Final Year Project] (Unpublished)

Zammeri, Mohammad Farhan (2013) Experimental Characterization of the Absorptivity of Various Ground Materials for Solar Chimney Application. [Final Year Project] (Unpublished)

This list was generated on Wed Dec 11 02:49:39 2024 +08.