Items where Department / MOR is "Mechanical" and Year is 2021

SURESH KUMAR, SUBHALAKSHMI (2021) DEVELOPMENT OF SMART ANTI-CORROSION COATINGS WITH METAL ION END CAPPED NANOCONTAINER LOADED WITH SINGLE AND DUO GREEN CORROSION INHIBITORS. Masters thesis, Universiti Teknologi PETRONAS.

A

A Ganesh, Dinnassh (2021) Evaluation of Economic Production Quantity For Continuous Production System : Case Of Chilled Water Generation, Storage And Distribution. [Final Year Project] (Submitted)

A. Rahman, Ahmad Zairin Fadzil (2021) Failure pressure analysis of corroded pipeline with circumferential interacting defects subjected to combined loadings using FEM and ANN. [Final Year Project] (Submitted)

ABDUL GHANI ZUKRI, MUHAMMAD SHAFIQ (2021) STUDY OF EFFECTIVENESS BENZOTRIAZOLE LOADED HALLOYSITE NANOTUBE IN EPOXY AS ANTICORROSION COATING ON CARBON STEEL. [Final Year Project] (Submitted)

AHMAD BADARUDDIN, NUR AQILAH (2021) SIMULATION STUDY ON FUEL COMBUSTION OF WATER-TUBE BOILER IN PALM OIL MILL. [Final Year Project] (Submitted)

AHMAD KAMAL, UMAR MUSLIM (2021) DEVELOPMENT OF ANALYSIS STUDY ON MAINTENANCE DOWNTIME (MAINTAINABILITY) OF EQUIPMENT AND SYSTEM IN PETROCHEMICAL PLANT. [Final Year Project] (Submitted)

AKHTER, JAVE (2021) THEORETICAL AND EXPERIMENTAL EVALUATION OF A MODIFIED COMPOUND PARABOLIC CONCENTRATING SOLAR COLLECTOR USING OIL-BASED NANOFLUIDS. Doctoral thesis, UNSPECIFIED.

AL-AMIN, MD (2021) COATING OF BIOMEDICAL GRADE 316L STAINLESS STEEL WITH HA/MWCNT USING PM-EDM PROCESS. Masters thesis, Universiti Teknologi Petronas.

AMIR SOFFIAN, MUHAMMAD ASHRAF (2021) NUMERICAL MODELING OF SUPERHEATED STEAM CONDENSATION IN HEAT EXCHANGER. [Final Year Project] (Submitted)

Abd Manaf, Aiman Shaker (2021) The Effect Of Origami-Inspired Quadrilateral Mesh On The Mechanical Behaviour Of Carbon Fiber Reinforced Silica Composite. [Final Year Project] (Submitted)

Abdul Halim, Muhammad Hafiz (2021) THE INFLLUENCE OF TEMPERATURE ON THE CORROSION BEHAVIOUR OF GLASS FIBRE REINFORCED POLYMER STRENGTHENED STEEL. [Final Year Project] (Submitted)

Abdullah, Ahmad Zaimmul Adli (2021) Remaining Useful Life Assessment of Pipeline via Finite Element Analysis and FITNET FFS Method by Evaluating Burst Pressure of Cylindrical Pipeline and Probabilistic Method. [Final Year Project] (Submitted)

Abdullah, Kamal Hanafi (2021) DEVELOPMENT OF RELIABILITY, AVAILABILITY AND MAINTAINABILITY MODEL FOR RECIPROCATING COMPRESSOR IN MRCSB. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhamad Faiz Danial (2021) COMPUTATIONAL FLUID DYNAMIC (CFD) INVESTIGATION ON PERFORMANCE OF PARABOLIC TROUGH COLLECTOR (PTC) USING OIL BASED NANOFLUID. [Final Year Project] (Submitted)

Ami Ardi, Muhamad Afiq Affandi (2021) INVESTIGATIONS OF MECHANICAL PROPERTIES AND MICROSTRUCTURE ANALYSIS OF AL 7075 GNP’S COMPOSITES. [Final Year Project] (Submitted)

Ami Ardi, Muhamad Afiq Affandi (2021) INVESTIGATIONS OF MECHANICAL PROPERTIES AND MICROSTRUCTURE ANALYSIS OF AL 7075 GNP’S COMPOSITES. [Final Year Project] (Submitted)

Azarol Nazwi, Azril Aiman (2021) Feasibility of Single Barrel Heave Compensator 5MT. [Final Year Project] (Submitted)

B

Balachandran, Mokhan (2021) Thermal Comfort Study of a Building Equipped with Nanofluid Assisted Thermoelectric Air Conditioner for the Hot Humid Climate of Malaysia. [Final Year Project] (Submitted)

C

CHANDERENG, NAWIIN (2021) Development and Characterization of Carbon Quantum Dots from Green Synthesis Route for Potential Supercapacitor Application. [Final Year Project] (Submitted)

CHIN, ADAM REDUAN (2021) PORE-SCALE MODELLING OF FLOW BOILING HEAT TRANSFER IN METAL FOAM HEAT EXCHANGER. [Final Year Project] (Submitted)

Cheah , Yuen Hung (2021) Experimental Study of the Influences of Temperature and Thermal Insulation on Stress Corrosion Cracking using 3-point bend test. [Final Year Project] (Submitted)

Crist Ting, May Yie (2021) Microstructural and Mechanical Behaviour of Powder Metallurgy Processed TiC Reinforced Al7075-Based Composites. [Final Year Project] (Submitted)

D

DZULHIKAM, DZULAISAR (2021) EFFECTS OF AMPLITUDES OF EXTERNAL MECHANICAL EXCITATION ON VIBRATION RESPONSE OF PIPING SYSTEM. [Final Year Project] (Submitted)

E

Elavarasu, Vinoshan (2021) Effect Of Tungsten Carbide Tool On The Mechanical Properties Of Friction Stir Lap Welded Aluminium And Stainless Steel Alloy. [Final Year Project] (Submitted)

G

Ganesan, Kogulan (2021) The Effects of Metal Organic Framework (MOF) On Thermal Performance of Intumescent Fire-Retardant Coating. [Final Year Project] (Submitted)

Ghazali, Ahmad Farhan Izzuddin (2021) Evaluation of Cathodic Protection Potential Criteria for Stainless Steel and Carbon Steel Couple in Seawater Environment. [Final Year Project] (Submitted)

Ghazali, Ahmad Farhan Izzuddin (2021) Evaluation of Cathodic Protection Potential Criteria for Stainless Steel and Carbon Steel Couple in Seawater Environment. [Final Year Project] (Submitted)

Ghazali, Nur Ajwa (2021) Study of Preferential Weld Corrosion in Carbon Dioxide Environment with Flowing Conditions. [Final Year Project] (Submitted)

H

HAMZAH, MOHAMAD NASHRIQ (2021) CHARACTERIZATION OF AA6061/ GRAPHITE COMPOSITES FOR ENHANCED MECHANICAL PROPERTIES USING MULTI-PASS FRICTION STIR PROCESSING. [Final Year Project] (Submitted)

HARBHAJAN SINGH, ALWINJEET SINGH (2021) ANALYZE THE ACCURACY AND PRECISION OF SLIP-ON SPROCKETS. [Final Year Project] (Submitted)

HARIS, MUHAMMAD (2021) STUDY ON CALCINATION OF HALLOYSITE NANOTUBE (HNT)TO ENHANCE EFFICIENCY OF 2-MERCAPTOBENZOXAZOLE (MBO) LOADED CALCINED HNT EPOXY AS A SMART ANTICORROSIVE COATING FOR CARBON STEEL. Masters thesis, Universiti Teknologi PETRONAS.

HUSSAIN SHAH, SYED ZULFIQAR (2021) CHARACTERIZATION AND DAMAGE MODELLING OF RESIN INFUSED THERMOPLASTIC 3D FIBRE REINFORCED COMPOSITE. Doctoral thesis, UNSPECIFIED.

HUSSEIN, OMAR ASSI (2021) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF HYBRID NANOFLUID WITH CORROBORATIVE CHARACTERISTICS FOR SOLAR COLLECTOR APPLICATIONS. PhD. thesis, Universiti Teknologi PETRONAS.

Harip, Nur Zaiha Liyana (2021) Azobenzene Derivatives as Corrosion Inhibitors for Carbon Steel Corrosion in Carbon Dioxide (CO2) Saturated Sodium Chloride (NaCl). [Final Year Project] (Submitted)

Hassan, Muhammad Aqib (2021) Improvement in oxidation resistance and electrical properties of SOFCs interconnect via annealing of spinel layer. Masters thesis, Universiti Teknologi Petronas.

Hassan, Muhammad Syahiran (2021) Assessment of Straight and Bend Aluminium Alloy 6061 Pipelines Operating Under High Pressure and Temperature Condition Up to 24 Hours by Using Finite Element Analysis. [Final Year Project] (Submitted)

J

Jeyaseelan, Deertanan (2021) Preliminary Study on the Synthesis of Silica Dioxide Using CoconutFibre Ash(CFA). [Final Year Project] (Submitted)

K

KABIR, A K M SAROWER (2021) INTUMESCENT COATING INFLUENCE ON DRILLED HOLE INTEGRITY OF GLASS-CARBON HYBRID EPOXY COMPOSITE. Masters thesis, Universiti Teknologi PETRONAS.

Khairulannuar, Redhwan Ariff (2021) Replacement Model for Discrete Manufacturing Facilities Adopting Job Shop Type Production. [Final Year Project] (Submitted)

Komarudin, Aiman Hamzi (2021) Finite Element Analysis of Composite Hybrid Pipes through Ring Tests. [Final Year Project] (Submitted)

Kueh, Shao Chih (2021) Chemically Infused Scale Inhibitor Based Nanoadditives in Porous Proppants for Improved Fracture Conductivity. [Final Year Project] (Submitted)

L

Liew, Zhi Bin (2021) Study of Rooftop Hybrid Solar Wind Renewable Energy Applications for East Coast of Peninsular Malaysia. [Final Year Project] (Submitted)

M

MAHMUD, ABDULLAHI (2021) SYNTHESIS OF POLY (OCTANEDIOL CITRATE) BASED NANO SILICA COMPOSITE FOR BIOMEDICAL APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

MAHMUD, MUHAMMAD NABIL AHNAF (2021) COATING PERFORMANCE UNDER EXCESSIVE CATHODIC POLARIZATION. [Final Year Project] (Submitted)

MAT SHAYUTI, MUHAMMAD SHAFIQ (2021) MECHANISM OF CRUDE OIL REMOVAL FROM SAND USING ULTRASONIC ENERGY. Doctoral thesis, UNSPECIFIED.

MAT YAAKOB, SARINI (2021) PERFORMANCE EVALUATIONS OF GLASS FIBER REINFORCED GEOPOLYMER COMPOSITES AS COATING FOR CARBON STEEL PROTECTION FROM CORROSION. Doctoral thesis, UNSPECIFIED.

MAZLAN, NISHA FAIRUZ (2021) THE INFLUENCE OF PROCESSING PARAMETERS ON THE FORMATION OF SILICON DIOXIDE FROM RICE HUSK. [Final Year Project] (Submitted)

MOHAMAD JAMEL BASHA, MOHD HAFIF BASHA (2021) INVESTIGATION OF DOWNDRAFT CO-GASIFICATION OF PALM KERNEL SHELL AND POLYSTYRENE WITH AIR AS THE GASIFYING AGENT FOR PRODUCTION OF SYNTHESIS GAS. Doctoral thesis, UNSPECIFIED.

MOHD NOOR, SITI NURSYUKRINA (2021) EXPERIMENTAL INVESTIGATION ON THE ADSORPTION OF GRAPHENE NANOPLATELETS INTO SANDSTONES USING SODIUM CARBOXYMETHYL CELLULOSE. [Final Year Project] (Submitted)

MOHD NOR, MOHD AZRI (2021) ANALYSIS AND OPTIMIZATION OF HYDROCYCLONE GEOMETRY USING BOX-BEHNKEN AND MULTI-OBJECTIVE OPTIMIZATION ALGORITHM. Doctoral thesis, UNSPECIFIED.

MOHD SAIFUDDIN, MUHAMMAD SYAMIM (2021) Effects of Void Fractions on Vibration Behaviour of Pipe Conveying Fluids. [Final Year Project] (Submitted)

MUJAHID, YASIR (2021) EFFECTS OF VACUUM-BAG-ONLY PROCESSING PARAMETERS ON SHAPE CONFORMATION, VOID CONTENT AND MECHANICAL PROPERTIES OF COMPOSITES. Masters thesis, Universiti Teknologi PETRONAS.

MUSA, NURUL FERLIENA (2021) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM) ANALYSIS AND THE DEVELOPMENT OF COGENERATION PLANT RELIABILITY BLOCK DIAGRAM (RBD). [Final Year Project] (Submitted)

Manogran, Johan Suppiah (2021) Ultra-Thin Nanocomposite Layers Coated Proppant for improved Compression Strength. [Final Year Project] (Submitted)

Misnan, Mohd Hamizan Muqri (2021) CFD MODELLING OF MOISTURE SEPARATION IN INLINE SEPARATOR. [Final Year Project] (Submitted)

Mohamad Yasin, Muhammad Hilman (2021) Study of Particle Velocity Impact on The Surface of M-152 Steel and SiCp/Ti- 6Al-4V Metal Matrix Composite. [Final Year Project] (Submitted)

Mohamed Asri, Mohamad Aimran (2021) Performance Simulation of a Free Piston Linear Generator by Using MATLAB Simulink. [Final Year Project] (Submitted)

Mohd Asri, Ahmad Fuad (2021) Diagnosability Evaluation of Mechanical Systems Design Using Data Analysis. [Final Year Project] (Submitted)

Mohd Asri, Muhammad Izzudin (2021) Material Flow Modelling During Friction Stir Welding (FSW) Process Using Smooth-Particle Hydrodynamics (SPH) Method. [Final Year Project] (Submitted)

Mohd Assri, Muhammad Amirul Aiman (2021) Mechanical Properties Investigation of Ti-6Al-7Nb as an Alternative Biomedical Tools. [Final Year Project] (Submitted)

Mohd Azid, Nurul Fathonah (2021) Experimental Investigation of Solar Vortex Power Generation System Integrated with Sensible Heat TES. [Final Year Project] (Submitted)

Mohd Burhan, Muhammad Izqandar (2021) ROTOR DYNAMIC DIAGNOSTICS USING FINITE ELEMENT ANALYSIS. [Final Year Project] (Submitted)

Mohd Faudzi, Mohamad Faeesol (2021) Development of Tracking Signal for Non-homogeneous Poisson Process Model. [Final Year Project] (Submitted)

Mohd Nuri Al-Amin, Nu’man Al-Basyir (2021) SIMULATION TO ENHANCE PERFORMANCE OF GLOBE VALVE. [Final Year Project] (Submitted)

Muhammad Juffri, Muhammad (2021) CFD Investigation of Thermal Performance of the Flat Plate Solar Collector by using Vibration. [Final Year Project] (Submitted)

N

NACHIAPPAN, ROHAN (2021) A COMPARATIVE STUDY OF INHIBITORS EFFICIENCY ON CORROSION OF CARBON STEEL REBAR IN CHLORIDE ENVIRONMENT. [Final Year Project] (Submitted)

NASEER, HARIS (2021) PERFORMANCE ANALYSIS OF COMPOUND PARABOLIC CONCENTRATOR INTEGRATED WITH EVACUATED TUBE RECEIVER USING HYBRID NANOFLUIDS. Masters thesis, Universiti Teknologi PETRONAS.

Nor Zaihar, Naim Zafran (2021) Non-Linear Structural Analysis of a Tensioner During Pipe Lay. [Final Year Project] (Submitted)

Nurulzahar, Farhan Adib (2021) Study of Organic Acid Corrosion for Steel Pipeline in Wet. [Final Year Project] (Submitted)

O

ONG, SZE KUAN (2021) STACKING SEQUENCE OPTIMIZATION OF LAMINATE COMPOSITES USING HASHIN FAILURE CRITERIA. [Final Year Project] (Submitted)

OTHMAN, NURUL HUSNA (2021) EPOXY COATING REINFORCED WITH GO-ZNO AS COATINGS FOR THE PROTECTION AGAINST HIGH-PRESSURE CO2 GAS ENVIRONMENT. PhD. thesis, Universiti Teknologi PETRONAS.

P

P.Arumugam, Yogenraj (2021) Investigations on Friction Melt Bonding of Aluminium-steel lap Joints. [Final Year Project] (Submitted)

PALU, THIRUKKUMARRAN (2021) SIMULATION OF GASIFICATION PROCESS FOR OIL PALM BASED BIOMASS PELLETS USING MATLAB. [Final Year Project] (Submitted)

PATIL, NAMDEV ASHOK (2021) CHARACTERIZATION AND PARAMETER OPTIMIZATION OF FRICTION STIR PROCESSED AA7075 HYBRID SURFACE COMPOSITES. Doctoral thesis, UNSPECIFIED.

Padil, Syariza Fadli Ansary (2021) Development of Halloysite Nanotube As The Future Coating Inhibitor Against Corrosion. [Final Year Project] (Submitted)

Patthi, Ahmad Farid (2021) THE INFLUENCE OF COMBUSTION PROCESS PARAMETER ON THE FORMATION OF SILICA FROM OIL PALM EMPTY FRUIT BUNCH (OPEFB). [Final Year Project] (Submitted)

R

RAJA, NAVIN (2021) CRASHWORTHINESS ANALYSIS OF TRAPEZOID 3D ORIGAMI CRASH STRUCTURE. [Final Year Project] (Submitted)

RAVI, RUBEN (2021) Chloride Induced Stress Corrosion Cracking For Thermally Insulated Austenitic Stainless Steel Type 304 Using Wick Test. [Final Year Project] (Submitted)

REMESH, SATHANISWARMAN (2021) Development of Oil Palm Lignin-Derived LSG Infused with Nanoadditives for Potential Supercapacitor Application. [Final Year Project] (Submitted)

ROSLI, MOHD ARIF FAHMI (2021) EXPERIMENTAL INVESTIGATION OF DROPLET EVAPORATION AND MICRO EXPLOSION BEHAVIOUR OF GAS-TO-LIQUID (GTL) FUEL. Masters thesis, Universiti Teknologi PETRONAS.

ROSLI, MUHAMAD FADHLI (2021) DEVELOPMENT OF PREDICTION MODELS OF OIL & GAS PIPELINE SUBJECT TO CORROSION USING REGRESSION TECHNIQUES. Masters thesis, Universiti Teknologi PETRONAS.

RUMAIZI, MUHAMMAD AMIRUL HAZIQ (2021) MODELLING OF THE TIME TO BOILOVER USING STATISTICAL ANALYSIS AND ARTIFICAL NEURAL NETWORKS. [Final Year Project] (Submitted)

Ramli, Amir Qayyum (2021) TO DESIGN A COMPREHENSIVE ENGINEERING TRAINING MODULE USING SWANSOFT CNC SIMULATOR. [Final Year Project] (Submitted)

Rosnizam, Nur Izzah Farzana (2021) Effect of Fluid Velocity and Sand Flowrate on The Intrusive Erosion Probe Using 3D Computational Method. [Final Year Project] (Submitted)

S

SHAIK, NAGOOR BASHA (2021) PIPE CONDITION PREDICTION MODELS FOR OIL AND GAS PIPELINES USING ARTIFICIAL NEURAL NETWORKS. Doctoral thesis, UNSPECIFIED.

SHOZIB, IMTIAZ AHMED (2021) INVESTIGATION OF ELECTROLESS Ni-P-TiO2 COMPOSITE COATING ON AA7075 FOR SURGICAL TOOLS APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

Sadhik Batcha, Mohd Ansar (2021) Determining Reduction of Diesel Fuel Consumption When Using Emulsified Biodiesel Fuels Derived from Palm Oil. [Final Year Project] (Submitted)

Senthilvasan, Kishaan Kumar (2021) Study On The Effect Of Contemporary Malaysian House Designs On Energy Consumption. [Final Year Project] (Submitted)

Shania Ting, Ying Ying (2021) Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond. [Final Year Project] (Submitted)

Sim , Chieh Ying (2021) Numerical simulation and evaluation of solar chimney coupled with heat trap unit. [Final Year Project] (Submitted)

Sridaran Nair, Wamadevan Nair (2021) Remaining Strength Estimation For AISI 1020 Carbon Steel Pipeline Internal Corrosion Using Finite Element Analysis. [Final Year Project] (Submitted)

Suresh Naidu, Shaarvin Naidu (2021) Fire Hazard Risk Assessment Due to Domino Effect in Petroleum Plant. [Final Year Project] (Submitted)

Syahril, Zuhair Amin (2021) Study of Erosion Formation on M152 Steel Alloy due to Impact Angle. [Final Year Project] (Submitted)

T

TAUFIQURRAHMAN, IQBAL (2021) THE STUDY ON THE RESISTANCE SPOT WELDING OF DISSIMILAR MATERIALS OF STAINLESS STEEL 316L AND TI-6AL-4V TITANIUM ALLOY WITH THE INTERLAYER OF ALUMINUM ALLOY. Masters thesis, Universiti Teknologi PETRONAS.

Tan, Tai Keong (2021) Performance Analysis of a Novel Nanofluid Assisted Thermoelectric Air Conditioner for Energy Efficient Building. [Final Year Project] (Submitted)

Thamil Selvan, Sritharan (2021) Real Time Flow Assurance Diagnostic Using Data Analytics. [Final Year Project] (Submitted)

Thamotharan, Naaventhiran (2021) Study on The Mechanical Properties of Aluminium Wire Made from Friction Extrusion Process. [Final Year Project] (Submitted)

Tony, Charles Runyaam (2021) Prototyping and Piloting the Flexi Hose for Onshore and Offshore Pipeline Rehabilitation. [Final Year Project] (Submitted)

V

VEERENDRA, CHITTURI (2021) INVESTIGATION ON WELDABILITY OF DISSIMILAR FRICTION STIR WELDED AA5052 AND SS304 ALLOYS. Doctoral thesis, UNSPECIFIED.

Veejendran, Shesathri Ram (2021) Development and Characterization of Laser Scribed Polyimide Graphene Electrochemical Supercapacitor Electrodes with Different Substrates. [Final Year Project] (Submitted)

W

Wan Suhaimi, Wan Irfan Hafez (2021) Convective Heat Transfer of Nanofluids in Helical Tube with Twisted Tape Insert. [Final Year Project] (Submitted)

Y

YAMIN, MOHD FADILLAH (2021) MECHANICAL AND MICROSTRUCTURE PROPERTIES EVALUATION OF SIMILAR THIN AA7075-T6 WELDS BY REFILL FRICTION STIR SPOT WELDING. Masters thesis, Universiti Teknologi PETRONAS.

Yang, Xiong Liang (2021) FABRICATION AND CHARACTERIZATION OF AL7075-TITANIUM CARBIDE/GRAPHITE COMPOSITES FOR ENCHANCED MECHANICAL PROPERTIES USING FSP. [Final Year Project] (Submitted)

Yap, Hong Yi (2021) Study of Solid Particles Properties In Influencing Erosion of Gas Turbine Using Computational Fluid Dynamics. [Final Year Project] (Submitted)

Z

ZULKIFLE, MUHAMMAD AL-AMIN (2021) Failure Prediction in Laminated Fiber Reinforced Composite. [Final Year Project] (Submitted)

Zakaria, Mohd Faiz Farhan (2021) Finite Element Analysis of Hybrid Composite Plate through Tensile Test. [Final Year Project] (Submitted)

Zamberi, Mohd Zaim Zarin (2021) Investigation of Solar Refrigeration System with Ground Based Cold Thermal Energy Storage for Tropical Countries. [Final Year Project] (Submitted)