Items where Subject is "TN Mining engineering. Metallurgy"

Thesis

Yamusa Idris Bello, Idris Bello (2024) Highway Landslides Risk Assessment and Vulnerability Model Development Using Geospatial And Structural Geology Techniques. Doctoral thesis, Universiti Teknologi PETRONAS.

Final Year Project

ADIB ZULHILMI BIN MOHD ALIAS, ADIB ZULHILMI (2012) MATHEMATICAL MODELING OF HEAT TRANSFER IN MULTILATERAL WELL. [Final Year Project] (Unpublished)

AHMAD FARIS HAFIZI BIN AHMAD PAUZI, AHMAD FARIS HAFIZI (2012) Assessing Reservoir Performance and Modeling using Prosper for Idle Well Reactivation. [Final Year Project] (Unpublished)

Adnan bin Hanapai, Adnan (2012) Design Methodology of Overshot Inverted Swellable Elastomer Packer. [Final Year Project] (Unpublished)

Afiq Hanafi Bin Mohd Ramli, Afiq Hanafi (2012) ETRO as a New Oil-Based Drilling Fluid for High Pressure High Temperature and Deepwater Well. [Final Year Project] (Unpublished)

Afiq Safeeuddin bin Nordin, Afiq Safeeuddin (2012) Enhancement of Kinetic Hydrate Inhibitor Polyvinylpyrrolidone(PVP) with Addition of Polyethyleneoxide (PEO). [Final Year Project] (Unpublished)

Ahmad Faheem Bin Md Sani, Ahmad Faheem (2012) Drag Reducing Agent for Water System Using Natural Polymer (Aloe Vera). [Final Year Project] (Unpublished)

Ahmad Hisyam Rosaimi Bin Hassim, Ahmad Hisyam Rosaimi (2012) The Effect of Permeability towards Coalbed Methane (CBM) Production. [Final Year Project] (Unpublished)

Ahmed Fatah Alrahman Ahmed Mohammed, Ahmed Fatah (2012) Effect of Different Drilling Fluids on Reservoir Skin Factor. [Final Year Project] (Unpublished)

Ahmed Fatah Alrahman Ahmed Mohammed, Ahmed Fatah Alrahman (2012) Simulation Study of Polymer Flooding in Naturally Fractures Reservoirs. [Final Year Project] (Unpublished)

Ahmed Nabil B Zakaria, Ahmed Nabil (2012) Drag Reducing Agent for Water System Using Natural Polymer (Hibiscus leaves). [Final Year Project] (Unpublished)

Arun S/O Balachandran, Balachandran (2012) EVALUATION OF PALM OIL BASED FATTY ACIDS FOR SYNTHESIS OF EMULSIFIER IN DRILLING FLUIDS. [Final Year Project] (Unpublished)

Bior Atem Bior Barach, Bior Atem Bior Barach (2012) THE STUDY OF HYSTERESIS EFFECT ON WAG INJECTION. [Final Year Project] (Unpublished)

CALVIN LOWRANS, CALVIN LOWRANS (2012) OPTIMISING DRILLING FLUID TO MAINTAIN MUDSTONE FORMATION STABILITY. [Final Year Project] (Unpublished)

EDDIE MAZWAN BIN OTHMAN, EDDIE MAZWAN BIN OTHMAN (2012) Developing non-Chemical Flow Assurance Strategies for Petroleum Production Systems. [Final Year Project] (Unpublished)

FAHMI AMNI BIN MUSTAFAAL BAKERI, FAHMI AMNI BIN (2012) NANO-EMULSION FOR PRODUCTION ENHANCEMENT PURPOSE. [Final Year Project] (Unpublished)

Farah Amalina Azianti Bt Azmi, Farah Amalina Azianti (2012) Mathematical Modeling of Wellbore Flow Behavior in Multilateral Wells. [Final Year Project] (Unpublished)

Hafizul Naim Bin Baniram, Hafizul Naim (2012) Designing a Cement Program by Using Landmark Software at HPHT Well. [Final Year Project] (Unpublished)

Harun, Muhammad Faithullah (2005) Seismic Data Visualization and Analysis/ By Muhammad Faithullah Bin Harun, TN 870 .M952 2005. [Final Year Project]

Ikhwanul Hafizi bin Musa, Ikhwanul Hafizi (2012) Enhanced Coal Bed Methane Recovery by Gas Injection. [Final Year Project] (Unpublished)

Lim Win Shen, Lim Win Shen (2012) Effect of Drag Reducing Agent on Water injection Well. [Final Year Project] (Unpublished)

MARUT DAMKAEW, MARUT DAMKAEW (2012) STUDY OF COCONUT OIL AS OIL BASED FLUID IN DRILLING OPERATION. [Final Year Project] (Unpublished)

MOHAMAD FIKREE BIN OTHMAN, MOHAMAD FIKREE (2012) EFFECTIVENESS OF PVP AND CMA AS HYDRATE INHIBITOR. [Final Year Project] (Unpublished)

MOHD SALLEHUDIN BIN ABDULLAH, MOHD SALLEHUDIN (2012) EFFECT OF PRESSURE AND TEMPERATURE DISTRIBUTION TO THE DRILLING FLUID DENSITY FOR MANAGED PRESSURE DRILLING (MPD) APPLICATIONS. [Final Year Project] (Unpublished)

MUHAMMAD ASLAM YUSUF BIN MUSA, MUHAMMAD ASLAM YUSUF (2012) PERFORMANCE OF DIFFERENT ACIDS FOR ACIDIZING TREATMENT IN SANDSTONE FORMATION (PANGKOR SAND). [Final Year Project] (Unpublished)

MUHAMMAD ZAHIN BIN ABD RAZAK, MUHAMMAD ZAHIN (2012) STUDY OF SESAME OIL AS OIL BASED FLUID IN DRILLING OPERATION. [Final Year Project] (Unpublished)

Maziah binti Abu Mukhtar, Maziah (2012) Mechanism of Alkaline Flooding in Low Acid Number Crude. [Final Year Project] (Unpublished)

Mohamad Aliff Muniff Bin Mohd Nasir, Mohamad Aliff Muniff (2012) The Enhancement of Non-Destructive Testing (NDT) through Active Thermal Infrared Thermography to Identify Internal Piping Failure. [Final Year Project] (Unpublished)

Mohamad Faizzudin B Mat Piah, Mohamad Faizzudin (2012) Enhanced Oil Recovery Field Development: Process Flow of EOR Selection for Sandstone Formation. [Final Year Project] (Unpublished)

Mohd Ashraf Bin Nor Azrol, Mohd Ashraf Bin Nor Azrol (2012) Well Configuration Design for Water Alternating Gas. [Final Year Project] (Unpublished)

Mohd Zainuri, Zainina Dini (2005) Prediction Of Particle Collection Efficiency, The Porosity And The Pressure Drop Across Filtration Media Using Femlab/ By Zainina Dini Mohd Zainuri, TN 695 .Z21 2005. [Final Year Project]

Mohiuddin, Zeeshan Mohiuddin (2007) Study on potentials of Light Oil Air Injection (LOAI) in Malaysia Oil Fields / by Zeeshan Mohiuddin,TN 870 .Z41 2007. [Final Year Project]

Moju Moses Duku Oliver, Moju Moses Duku Oliver (2012) Application of Inflow Control Device (ICD) for Optimizing Horizontal Well Performance. [Final Year Project] (Unpublished)

Muhamad Fazrin Bin Md Raus, Muhamad Fazrin Bin Md Raus (2012) Simulation of Onshore and Offshore Facility Flare Gas Reutilization in an Energy Recovery Scheme. [Final Year Project] (Unpublished)

Muhamad Firdaus Bin Zaini, Muhamad Firdaus (2012) The Enhancement of NDT Techniques through Active Thermal Infrared Thermography to Identify Corrosion under Insulation (CUI) in Downstream Piping. [Final Year Project] (Unpublished)

Muhammad Aizuddin B. Mohammad Roslan, Muhammad Aizuddin (2012) Gas Lift Optimization Of Bayan Wells Using PROSPER. [Final Year Project] (Unpublished)

Muhammad Raimi Bin Johari, Muhammad Raimi (2012) THE RELATIONSHIP BETWEEN PORE SPACE AND GRAIN SIZE. [Final Year Project] (Unpublished)

Muhammad Zulhilmi bin Muhammad, Muhammad Zulhilmi (2012) Study on the Effect of Different Ratio of Primary and Secondary Emulsifier in Drilling Fluid. [Final Year Project] (Unpublished)

Muhammad Zul’Aizat Mohd Zulkifli, Muhammad Zul’Aizat (2012) RESEARCH ON EVALUATING MICRO SIZE PARTICLE MATERIAL OF JATROPHA AS FLUID LOSS REDUCER IN SYNTHETIC HTHP DRILLING FLUIDS. [Final Year Project] (Unpublished)

Mustakim, Rusilah (2005) The effect of concentration of Surfactant in Enhanced Oil/Recovery (EOR): Viscosity & pH/by Rusilah Binti Mustakim, TN 870.R949 2004. [Final Year Project]

NGUYEN THE THAO, NGUYEN THE THAO (2012) DEVELOPING A MATHEMATICAL MODEL FOR HYDRAULIC FRACTURING IN MICROSOFT EXCEL. [Final Year Project] (Unpublished)

NIK MOHAMMAD FADHLAN BIN NIK KAMARUDDIN, NIK MOHAMMAD FADHLAN (2012) INVESTIGATION OF THE IMPACT OF SALINITY ON ASPHALTENE PRECIPITATION DURING WAG-CO2 INJECTION FOR A MALAYSIAN LIGHT OIL. [Final Year Project] (Unpublished)

NOOR „ALIAA AMIRA BINTI MOHD FAUZI, NOOR „ALIAA AMIRA (2012) Performance Of Different Acids For Acidizing Treatment In Sandstone Formation (Terengganu). [Final Year Project] (Unpublished)

NUR AZLIZA BINTI MOHD FUZI, NUR AZLIZA (2012) MECHANISM OF FORMATION DAMAGE USING ALKALINE FLOODING. [Final Year Project] (Unpublished)

Nguyen, , Thi Quynh Nga (2005) Mass transfer modeling for compact hybrid membrane-amine system in removal of CO2 form natural gas/ By Nguyen, Thi Quynh Nga, TN 880 .N576 2005. [Final Year Project]

Nik Fazril Ain Binti Sapian, Nik Fazril Ain (2012) Evaluation on Effectiveness of Ionic Liquids as Kinetic Hydrates Inhibitor Using Micro Differential Scanning Calorimeter (μ DSC). [Final Year Project] (Unpublished)

Nilton César Mugabe, Nilton César Mugabe (2012) OPTIMIZED FDP DESIGN PROCESS FLOW FROM RESERVOIR MODEL. [Final Year Project] (Unpublished)

Nur Hidayatul Asmaa’ Sazli, Nur Hidayatul Asmaa’ Sazli (2012) IDENTIFYING RESERVOIR COMPARTMENTALIZATION USING FIELD DATA – FIELD X CASE STUDY. [Final Year Project] (Unpublished)

Nurliana binti Alias, Nurliana (2012) A STUDY OF PRODUCTION OPTIMIZATION USING PROSPER. [Final Year Project] (Unpublished)

Nurul Nadia Ezzatty Bt Abu Bakar, Nurul Nadia Ezzatty (2012) To Evaluate Effectiveness of Polyacrylamide (PAM), Polyvinylpyrrolidone (PVP), and Polyethyleneoxide (PEO) as Drag Reducing Agent for Water System. [Final Year Project] (Unpublished)

Pamok Taamsri, Pamok Taamsri (2012) Enhancement of Silica Sand by Resin Coating for Sand Control Application. [Final Year Project] (Unpublished)

ROSSHAMILA AFIFAH BINTI MUDA, ROSSHAMILA AFIFAH (2012) Comparison between Two Surfactants (Sodium Oleate and Sodium Stearate)As Drag Reducing Agent in Water System. [Final Year Project] (Unpublished)

Sayidolimkhon Mirzaev, Sayidolimkhon Mirzaev (2012) Effect of Drillpipe Rotation on Cuttings Transport in Horizontal Wellbore Section. [Final Year Project] (Unpublished)

Seli, Phyllis (2005) Investigation of suitable surfactants in Enhanced Oil Recovery (EOR) / By Phyllis Seli, TN 871 .S464 2005. [Final Year Project]

Sermphon Klaiseengern, Sermphon Klaiseengern (2012) Comparing Compositional and Black Oil Models in Simulating Miscible C O2 Injection. [Final Year Project] (Unpublished)

Sidek, Sulaiman (2005) Integration of boiling liquid expanding vapour explosion (BLEVE) risk model with process simulator for inheret safety design/ By Sulaiman Bin Sidek, TN 690 .S949 2005. [Final Year Project]

Sufian Bin Abd Hamid, Sufian (2012) Prediction of Asphaltenes Behaviors in Reservoir during CO2 Injection. [Final Year Project] (Unpublished)

Suria Melanie Binti Mohammad, Suria Melanie (2012) To Determine the Efficiency of Wormlike Micelle as Drag Reducing Agent (DRA) for Flow Assurance. [Final Year Project] (Unpublished)

Syed Hamimie Fakhri bin Syed Mohamad, Syed Hamimie Fakhri (2012) Resistivity Modeling of Shaly Sand Formation in High Water Salinity. [Final Year Project] (Unpublished)

Taufiq bin Ahmad, Taufiq (2012) EFFECT OF NANO MATERIAL (GRAPHENE) IN OIL BASED DRILLING MUD. [Final Year Project] (Unpublished)

Umdao Nopparat, Umdao Nopparat (2012) RESEARCH STUDY ON FINDING A NEW SYNTHETIC OIL BASED MUD FROM ORGANIC MATERIAL (METHYL ESTER OF CASTOR OIL). [Final Year Project] (Unpublished)

WIN AHKAR MEIN, WIN AHKAR MEIN (2012) ANALYSIS ON VARIOUS FACTORS AFFECTING PRESSURE DROP ALONG THE GAS TRANSPORTATION PIPELINE DESIGN. [Final Year Project] (Unpublished)

Zaiyinul Ain Bin Zainal Rafit, Zaiyinul Ain (2012) A Comparison Study of Malaysian Mica as Loss Circulation Material in High Pressure High Temperature Drilling Fluid. [Final Year Project] (Unpublished)